CISCO

CBW150AX-S

IEEE 802.3IEEE 802.3abIEEE 802.3af/atIEEE 802.11a/b/g/n/ac/axIEEE 802.11h, 802.11d

2.4GHz: peak gain 4dBi, internal antenna, omnidirectional in azimuth5GHz: peak gain 5dBi, internal antenna, omnidirectional in azimuth

2x2 downlink MU-MIMO with two spatial streams
Uplink/downlink OFDMA
TWT
BSS coloring
MRC
802.11ax beamforming
20-, 40-, 80- channels
PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz)
Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
802.11 DFS
CSD support
WPA3 support

2x2 single-user/multi-user MIMO with two spatial streams, up to 867 Mbps in 5GHz
20-, 40-, and 80-MHz channels
Dynamic Frequency Selection (DFS)

802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps802.11n data rates on 2.4 GHz: 6.5 to 300 Mbps (MCS0-MCS15, HT 20/40)802.11ac data rates on 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9)802.11ax data rates on 2.4 amp; 5GHz: 6.5 to 1200 Mbps (MCS0-MCS11)

The IEEE 802.11ax emerging standard, also known as High-Efficiency Wireless (HEW) or Wi-Fi 6, builds on 802.11ac. It delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT. Wi-Fi 6 is designed to use both the 2.4-GHz and 5-GHz bands, unlike the 802.11ac standard.

UL 60950-1CAN/CSA-C22.2 No. 60950-1IEC 60950-1EN 60950-1IEC 62368-1EN 62368-1UL/CUL 62368-1

1GHz quad core processor

quad core

1GHz

1 GB DRAM

Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

1x Gigabit Ethernet (10/100/1000BASE-T autosensing), Power over Ethernet (PoE)

Authentication with 802.1X or MAC filtered
Dynamic VLAN or per port
Traffic locally switched or tunneled back to Master AP

512MB flash

802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps802.11n data rates on 2.4 GHz: 6.5 to 300 Mbps (MCS0-MCS15, HT 20/40)802.11ac data rates on 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9)802.11ax data rates on 2.4 amp; 5GHz: 6.5 to 1200 Mbps (MCS0-MCS11)

Business Access Point Mode

A group of access points and mesh extenders comprised of only CBW150AX and CBW151AXM devices may be managed as a single entity.
CBW150AX access points must not be installed on the same management network and CBW140AC or CBW240AC access points.
CBW150AX and CBW151AXM devices are supported by Cisco Business Dashboard versions 2.4.1 and higher.

Mesh technology

By adhering to the 802.11ax standard, the Cisco Business 150AX Access Point delivers a data rate of up to 1.2 Gbps on its 5-GHz radio. This exceeds the data rates offered by access points that support the 802.11ac Wave 1 and Wave 2 standards. It also enables a total aggregate dual-radio data rate of up to 1 Gbps, providing the necessary foundation to stay ahead of the performance expectations and needs of wireless users.In recent years, small businesses have increasingly preferred wireless access as the principal form of network connectivity. Along with this shift, there is an expectation that wireless should enable a high performance experience. The Cisco Business 150AX Access Point delivers industry-leading performance for highly secure and reliable wireless connections, for an optimal end-user experience.Table 1 lists the features and benefits of the Cisco Business 150AX Access Point.

Included with the access point:Mounting bracket and hardware

9.2W (maximum, on PoE)

802.3af/at Ethernet switch; a Cisco Business Switch with PoE is recommended (CBS220/250/350 series)

OperatingTemperature: 32deg; to 104deg;F (0deg; to 40deg;C)
Humidity: 0% to 95% (noncondensing)
Maximum altitude: 9843 ft (3000 m) at 40deg;C
Nonoperating (storage and transportation)Temperature: ndash;22deg; to 158deg;F (-30deg; to 70deg;C)
Humidity: 0% to 95% (noncondensing)
Maximum altitude: 15,000 ft (4570 m) at 25deg;C

3 ปี